Terminal Block and Grounding Strap for GE DRSR483EG0CC Dryer. Genuine product manufactured by GE. This terminal block and grounding strap is for dryers.
It connects the house electrical power to the dryer wiring harness.
Unplug the dryer before installing this part. Wear work gloves to protect your hands.
Lint Trap Duct Assembly for GE DRSR483EG0CC Dryer. Genuine product manufactured by GE. . Does NOT include moisture sensor bars, includes felt drum seal, blower seal, wires, wire connector, and wire tie.
Drum Bearing Slide/Glide/Pad for GE DRSR483EG0CC Dryer. Genuine product manufactured by GE.
Note: There are two of these needed on your dryer. These go on the inner most slots on the front bearing. Sold individually will need to purchase two. The drum slides support the front of the dryer drum instead of rollers or bearings. As they wear out the dryer will make more noise.
Front Drum Bearing Slide (White) for GE DRSR483EG0CC Dryer. Genuine product manufactured by GE.
Note: The dryer's drum slides help to support the front of the drum as it rotates. If the drum slides are worn out, the dryer will be noisy. It is recommended replacing all of the slides together.
Felt for Trap Duct for GE DRSR483EG0CC Dryer. Genuine product manufactured by GE. Note: WE09X20441 has been discontinued by the manufacturer. A substitution may be shipped in lieu of this product. The substitution may have a different design, but it will still be compatible with the same appliance models as the original part. It is not uncommon for manufacturers to discontinue parts and create substitutions. While the original part(s) and their substitution(s) may vary in appearance, they possess the same functionality. Please verify that your appliance model is compatible with this part before finalizing your order. GRP is not responsible for incorrect parts ordered.
Idler Arm for GE DRSR483EG0CC Dryer. Genuine product manufactured by GE. This idler pulley arm is for dryers.
It holds the idler pulley.
Unplug the dryer before installing this part. Wear work gloves to protect your hands.
The GE Ground Strap Assembly is needed when repairing your GE appliance and is a genuine OEM (Original Equipment Manufacturer) part from GE.
Eventually parts can wear out on your GE appliance, when that happens trust Genuine Replacement Parts to have the GE replacement part you need to fix your appliance. We are one of the top online options for GE replacement parts and repair. If you have the model number or part number of your appliance that is different than what is being shown, please enter it at the top search bar for best results.
This GE requires part when fixing your appliance. Follow the instructions in the owner's manual to install the part.
