Blower Wheel w/insert for Kenmore 267.1532413 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 267.1532413. This dryer blower wheel is for laundry centers.
It attaches to the dryer drive motor shaft. It blows air through the drum and out the exhaust vent.
Unplug the laundry center before installing this part. Wear work gloves to protect your hands.
Dryer Idler Arm for Kenmore 267.1532413 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 267.1532413. This dryer idler arm is for laundry centers.
It maintains proper tension on the dryer drive belt to spin the drum.
Unplug the laundry center before installing this part. Wear work gloves to protect your hands.
Basket Assembly - 27 Inch for Kenmore 267.1532413 Dryer. Genuine Product, GE manufactured the original product for your Kenmore 267.1532413. Special sales notes: ** Freight exception item. Freight charges will always apply. The freight charge will be assessed after the order has been placed.
Gas Safety Thermostat (27 in) for Kenmore 267.1532413 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 267.1532413.
Washer Tub-To-Pump Hose for Kenmore 267.1532413 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 267.1532413. This washer tub-to-pump hose is for laundry centers.
It carries water from the washer tub to the drain pump.
Unplug the laundry center and shut off the water supply before installing this part. Wear work gloves to protect your hands.
Lactuator Lid for Kenmore 267.1532413 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 267.1532413. This washer lid switch actuator is for laundry centers.
It presses the lid switch when you close the lid to start the washer.
Unplug the laundry center before installing this part. Wear work gloves to protect your hands.
Agitator Screw and O-Ring for Kenmore 267.1532413 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 267.1532413. This agitator screw and O-ring is for washers.
It attaches the agitator auger to the agitator base.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
Shifter Hub for Kenmore 267.1532413 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 267.1532413. This washer shifter hub is for laundry centers.
It connects above the transmission pulley to hold the transmission during the agitation mode.
Unplug the laundry center before installing this part. Wear work gloves to protect your hands.
Spring Shifter for Kenmore 267.1532413 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 267.1532413. This shifter spring is for washers.
It applies pressure against the shifter hub to hold the shifter hub in place.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
LC Transmission and Basket Kit - 27inch for Kenmore 267.1532413 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 267.1532413.
Water Inlet Valve for Kenmore 267.1532413 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 267.1532413. This water inlet valve is for washers.
It controls the water flow into the washer.
Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands.
Bearing for Kenmore 267.1532413 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 267.1532413. Note: WE03X25079 has been discontinued by the manufacturer. A substitution may be shipped in lieu of this product. The substitution may have a different design, but it will still be compatible with the same appliance models as the original part. It is not uncommon for manufacturers to discontinue parts and create substitutions. While the original part(s) and their substitution(s) may vary in appearance, they possess the same functionality. Please verify that your appliance model is compatible with this part before finalizing your order. GRP is not responsible for incorrect parts ordered.
The GE Support Sensor Board is needed when repairing your GE appliance and is a genuine OEM (Original Equipment Manufacturer) part from GE.
Eventually parts can wear out on your GE appliance, when that happens trust Genuine Replacement Parts to have the GE replacement part you need to fix your appliance. We are one of the top online options for GE replacement parts and repair. If you have the model number or part number of your appliance that is different than what is being shown, please enter it at the top search bar for best results.
This GE requires part when fixing your appliance. Follow the instructions in the owner's manual to install the part.
The GE Speed Sensor is needed when repairing your GE appliance and is a genuine OEM (Original Equipment Manufacturer) part from GE.
Eventually parts can wear out on your GE appliance, when that happens trust Genuine Replacement Parts to have the GE replacement part you need to fix your appliance. We are one of the top online options for GE replacement parts and repair. If you have the model number or part number of your appliance that is different than what is being shown, please enter it at the top search bar for best results.
This GE requires part when fixing your appliance. Follow the instructions in the owner's manual to install the part.
The GE Lint Filter is needed when repairing your GE appliance and is a genuine OEM (Original Equipment Manufacturer) part from GE.
Eventually parts can wear out on your GE appliance, when that happens trust Genuine Replacement Parts to have the GE replacement part you need to fix your appliance. We are one of the top online options for GE replacement parts and repair. If you have the model number or part number of your appliance that is different than what is being shown, please enter it at the top search bar for best results.
This GE requires part when fixing your appliance. Follow the instructions in the owner's manual to install the part.
The GE Screw is needed when repairing your GE appliance and is a genuine OEM (Original Equipment Manufacturer) part from GE.
Eventually parts can wear out on your GE appliance, when that happens trust Genuine Replacement Parts to have the GE replacement part you need to fix your appliance. We are one of the top online options for GE replacement parts and repair. If you have the model number or part number of your appliance that is different than what is being shown, please enter it at the top search bar for best results.
This GE requires part when fixing your appliance. Follow the instructions in the owner's manual to install the part.
![Kenmore 267.1532413 LP Gas Conversion Kit - 27\" - Genuine OEM](images/thumb_cache8/86/kenmore-267-1532413-lp-gas-conversion-kit-27-genuine-oem-140x140.jpg "Kenmore 267.1532413 LP Gas Conversion Kit - 27\\" - Genuine OEM")
