Lint Trap Duct Assembly for Hotpoint NBXR463GB1WW Dryer. Genuine Product, GE manufactured the original product for your Hotpoint NBXR463GB1WW. . Does NOT include moisture sensor bars, includes felt drum seal, blower seal, wires, wire connector, and wire tie.
Lint Screen Housing Seal (36 in) for Hotpoint NBXR463GB1WW Dryer. Genuine Product, GE manufactured the original product for your Hotpoint NBXR463GB1WW.
2-Coil Gas Shut-Off Valve Assembly for Hotpoint NBXR463GB1WW Dryer. Genuine Product, GE manufactured the original product for your Hotpoint NBXR463GB1WW.
Conversion Kit - LP to Natural Gas for Hotpoint NBXR463GB1WW Dryer. Genuine Product, GE manufactured the original product for your Hotpoint NBXR463GB1WW.
Front Drum Bearing Slide (White) for Hotpoint NBXR463GB1WW Dryer. Genuine product manufactured by Hotpoint.
Note: The dryer's drum slides help to support the front of the drum as it rotates. If the drum slides are worn out, the dryer will be noisy. It is recommended replacing all of the slides together.
Drive Motor Assembly for Hotpoint NBXR463GB1WW Dryer. Genuine Product, GE manufactured the original product for your Hotpoint NBXR463GB1WW. Replaces old "T" & "V" style motors.
LP to Gas Conversion Kit for Hotpoint NBXR463GB1WW Dryer. Genuine product manufactured by Hotpoint. This liquid propane (LP) conversion kit is for dryers.
It converts a natural gas dryer to operate on liquid propane.
A qualified technician should install this LP conversion kit because of the risk of explosion or fire if the kit is installed incorrectly.
Idler Arm for Hotpoint NBXR463GB1WW Dryer. Genuine Product, GE manufactured the original product for your Hotpoint NBXR463GB1WW. This idler pulley arm is for dryers.
It holds the idler pulley.
Unplug the dryer before installing this part. Wear work gloves to protect your hands.
Cap Nut for Hotpoint NBXR463GB1WW Dryer. Genuine Product, GE manufactured the original product for your Hotpoint NBXR463GB1WW. This cap nut is for dryers.
Follow appropriate safety practices when installing this cap nut.
Leveling Leg and Bracket Assembly (Rear) for Hotpoint NBXR463GB1WW Dryer. Genuine Product, GE manufactured the original product for your Hotpoint NBXR463GB1WW. This leveling leg and bracket is for dryers.
It attaches to the dryer base to support and level the dryer.
Wear work gloves to protect your hands when installing this part.