Leveling Leg and Bracket Assembly (Rear) for Hotpoint NWSR483GB0WW Dryer. Genuine Product, GE manufactured the original product for your Hotpoint NWSR483GB0WW. This leveling leg and bracket is for dryers.
It attaches to the dryer base to support and level the dryer.
Wear work gloves to protect your hands when installing this part.
Lint Trap Duct Assembly for Hotpoint NWSR483GB0WW Dryer. Genuine Product, GE manufactured the original product for your Hotpoint NWSR483GB0WW. . Does NOT include moisture sensor bars, includes felt drum seal, blower seal, wires, wire connector, and wire tie.
2-Coil Gas Shut-Off Valve Assembly for Hotpoint NWSR483GB0WW Dryer. Genuine Product, GE manufactured the original product for your Hotpoint NWSR483GB0WW.
Drum Bearing Slide/Glide/Pad for Hotpoint NWSR483GB0WW Dryer. Genuine product manufactured by Hotpoint.
Note: There are two of these needed on your dryer. These go on the inner most slots on the front bearing. Sold individually will need to purchase two. The drum slides support the front of the dryer drum instead of rollers or bearings. As they wear out the dryer will make more noise.
Conversion Kit - LP to Natural Gas for Hotpoint NWSR483GB0WW Dryer. Genuine Product, GE manufactured the original product for your Hotpoint NWSR483GB0WW.
Front Drum Bearing Slide (White) for Hotpoint NWSR483GB0WW Dryer. Genuine product manufactured by Hotpoint.
Note: The dryer's drum slides help to support the front of the drum as it rotates. If the drum slides are worn out, the dryer will be noisy. It is recommended replacing all of the slides together.
Lint Screen Housing Seal (36 in) for Hotpoint NWSR483GB0WW Dryer. Genuine Product, GE manufactured the original product for your Hotpoint NWSR483GB0WW.
Drive Motor Assembly for Hotpoint NWSR483GB0WW Dryer. Genuine Product, GE manufactured the original product for your Hotpoint NWSR483GB0WW. Replaces old "T" & "V" style motors.
LP to Gas Conversion Kit for Hotpoint NWSR483GB0WW Dryer. Genuine product manufactured by Hotpoint. This liquid propane (LP) conversion kit is for dryers.
It converts a natural gas dryer to operate on liquid propane.
A qualified technician should install this LP conversion kit because of the risk of explosion or fire if the kit is installed incorrectly.
Idler Arm for Hotpoint NWSR483GB0WW Dryer. Genuine Product, GE manufactured the original product for your Hotpoint NWSR483GB0WW. This idler pulley arm is for dryers.
It holds the idler pulley.
Unplug the dryer before installing this part. Wear work gloves to protect your hands.
Felt Trap Duct Seal for Hotpoint NWSR483GB0WW Dryer. Genuine Product, GE manufactured the original product for your Hotpoint NWSR483GB0WW. This drum felt seal is for dryers.
It allows the drum to glide smoothly on the front panel.
Unplug the dryer before installing this part. Wear work gloves to protect your hands.
Cap Nut for Hotpoint NWSR483GB0WW Dryer. Genuine Product, GE manufactured the original product for your Hotpoint NWSR483GB0WW. This cap nut is for dryers.
Follow appropriate safety practices when installing this cap nut.
