GE BSS25JSTRSS Refrigerator
Replacement Parts (OEM)

Freezer Shelf for GE BSS25JSTRSS Refrigerator. Genuine product manufactured by GE. This freezer shelf is for refrigerators.

Follow the directions in the owner's manual to install this freezer shelf in your refrigerator. Wear work gloves to protect your hands.

Evaporator Fan Motor Dust Cap for GE BSS25JSTRSS Refrigerator. Genuine product manufactured by GE. This evaporator fan motor dust cap is for refrigerators.

It prevents dust and debris from entering the fan motor bearing and housing.

Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.

Basket Bumper for GE BSS25JSTRSS Refrigerator. Genuine product manufactured by GE. This basket bumper is for freezers.

It prevents the basket from hitting the back of the freezer when you push in the basket.

Follow the instructions in the owner's manual when installing this part.

Defrost Thermostat for GE BSS25JSTRSS Refrigerator. Genuine product manufactured by GE. This is a defrost thermostat that is used on refrigerators and freezers. The defrost thermostat is what opens the heater circuit and allows the freezer compartment to be heated for short periods of time to get rid of frost but without heating the items in the freezer. The replacement process is fairly easy to do.A new defrost thermostat may be needed if the freezer is not defrosting or if the refrigerator is too warm. In some cases, the freezer is still cold but the refrigerator is not. The user may notice excess frost that is built upon the coils. If the defrost thermostat has gone bad, the unit may continuously run. This is a genuine General Electric part and is sourced directly from the manufacturer. It is sold individually. This specific defrost thermostat is compatible with refrigerators and freezers that are manufactured by either the General Electric brand or the Hotpoint brand.

Glide Bucket Right for GE BSS25JSTRSS Refrigerator. Genuine product manufactured by GE. This ice container slide rail is for refrigerators.
It supports the ice container as the ice container slides in and out.
Unplug the refrigerator and safely store any food that could deteriorate while the power is off before installing this part. Wear work gloves to protect your hands.

Condenser Fan Blade for GE BSS25JSTRSS Refrigerator. Genuine product manufactured by GE. This condenser fan blade is for refrigerators.

It moves air across the condenser coil to cool the hot refrigerant before it enters the evaporator.

Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part.

Armature Kit for GE BSS25JSTRSS Refrigerator. Genuine product manufactured by GE. This ice dispenser solenoid stirrup is for refrigerators.

It attaches to the solenoid plunger to move the ice container deflector arm for dispensing crushed ice or cubed ice.

Safely store any food that could deteriorate while the power is off and unplug the refrigerator when installing this part. Wear work gloves to protect your hands.

Ice Container Slide Rail (Right) for GE BSS25JSTRSS Refrigerator. Genuine product manufactured by GE.

Evaporator Cover Gasket for GE BSS25JSTRSS Refrigerator. Genuine product manufactured by GE.

Dispenser Door Recess Crank for GE BSS25JSTRSS Refrigerator. Genuine product manufactured by GE.

This dispenser door recess crank is a genuine General Electric part, sold individually. This dispenser door recess crank can be used as a replacement part for a refrigerator. The dispenser door recess crank is situated inside the dispenser assembly, and it facilitates the passage of filtered water from the dispenser assembly into a glass or mug. Symptoms of a damaged dispenser door recess crank include excessive condensation or sweating on the refrigerator door exterior, an ice maker that will not dispense ice, a door that will not open or shut properly, or excessive frost buildup. If any of these symptoms are occurring, they could be attributable to a damaged dispenser door recess crank. This damage could manifest in the form of punctures, holes, tears, nicks, scrapes, or erosion to the material. If this is the case, the component should be removed and replaced with this genuine OEM replacement part. The replacement will require a putty knife and a Phillips head screwdriver.This is an OEM part sourced directly from the manufacturer. It is sold individually. This dispenser door recess crank is compatible with the following appliance brands: General Electric, RCA, and Hotpoint.