Replacement Parts for:
GE CSCP5UGXAFSS Refrigerator Replacement Parts (OEM)

See parts diagram(s) for GE CSCP5UGXAFSS Refrigerator. Use our parts diagrams to identify which parts need replacement and how to remove and replace parts.

Search

Ice Maker Stripper for GE CSCP5UGXAFSS Refrigerator. Genuine product manufactured by GE. This ice maker cube ejector is for refrigerators.

It rotates to push the ice cubes from the ice maker into the ice container.

Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.

Evaporator Fan Motor Dust Cap for GE CSCP5UGXAFSS Refrigerator. Genuine product manufactured by GE. This evaporator fan motor dust cap is for refrigerators.

It prevents dust and debris from entering the fan motor bearing and housing.

Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.

Basket Bumper for GE CSCP5UGXAFSS Refrigerator. Genuine product manufactured by GE. This basket bumper is for freezers.

It prevents the basket from hitting the back of the freezer when you push in the basket.

Follow the instructions in the owner's manual when installing this part.

Drain Tube for GE CSCP5UGXAFSS Refrigerator. Genuine product manufactured by GE. This drain tube is for refrigerators.

It carries water formed during the defrost cycle to the drain pan at the bottom of the refrigerator.

Unplug the refrigerator before installing this part. Wear work gloves to protect your hands.

Defrost Thermostat for GE CSCP5UGXAFSS Refrigerator. Genuine product manufactured by GE. This is a defrost thermostat that is used on refrigerators and freezers. The defrost thermostat is what opens the heater circuit and allows the freezer compartment to be heated for short periods of time to get rid of frost but without heating the items in the freezer. The replacement process is fairly easy to do.A new defrost thermostat may be needed if the freezer is not defrosting or if the refrigerator is too warm. In some cases, the freezer is still cold but the refrigerator is not. The user may notice excess frost that is built upon the coils. If the defrost thermostat has gone bad, the unit may continuously run. This is a genuine General Electric part and is sourced directly from the manufacturer. It is sold individually. This specific defrost thermostat is compatible with refrigerators and freezers that are manufactured by either the General Electric brand or the Hotpoint brand.

Armature Kit for GE CSCP5UGXAFSS Refrigerator. Genuine product manufactured by GE. This ice dispenser solenoid stirrup is for refrigerators.

It attaches to the solenoid plunger to move the ice container deflector arm for dispensing crushed ice or cubed ice.

Safely store any food that could deteriorate while the power is off and unplug the refrigerator when installing this part. Wear work gloves to protect your hands.

Door Closure Spring for GE CSCP5UGXAFSS Refrigerator. Genuine product manufactured by GE.

Lever Assembly (Black) for GE CSCP5UGXAFSS Refrigerator. Genuine product manufactured by GE.

Door Stop for GE CSCP5UGXAFSS Refrigerator. Genuine product manufactured by GE.

Dispenser Door Recess Crank for GE CSCP5UGXAFSS Refrigerator. Genuine product manufactured by GE.

This dispenser door recess crank is a genuine General Electric part, sold individually. This dispenser door recess crank can be used as a replacement part for a refrigerator. The dispenser door recess crank is situated inside the dispenser assembly, and it facilitates the passage of filtered water from the dispenser assembly into a glass or mug. Symptoms of a damaged dispenser door recess crank include excessive condensation or sweating on the refrigerator door exterior, an ice maker that will not dispense ice, a door that will not open or shut properly, or excessive frost buildup. If any of these symptoms are occurring, they could be attributable to a damaged dispenser door recess crank. This damage could manifest in the form of punctures, holes, tears, nicks, scrapes, or erosion to the material. If this is the case, the component should be removed and replaced with this genuine OEM replacement part. The replacement will require a putty knife and a Phillips head screwdriver.This is an OEM part sourced directly from the manufacturer. It is sold individually. This dispenser door recess crank is compatible with the following appliance brands: General Electric, RCA, and Hotpoint.