GE PSH25MGWACV Refrigerator
Replacement Parts (OEM)

Refrigerator Dispenser Light Board for GE PSH25MGWACV Refrigerator. Genuine product manufactured by GE. This dispenser light board is for refrigerators. It illuminates the refrigerator dispenser and dispenser controls. Before installation, safely store any food that could deteriorate while the power is off and unplug the refrigerator or turn off the house circuit breaker. Wear work gloves to protect your hands.

Access Cover for GE PSH25MGWACV Refrigerator. Genuine product manufactured by GE. This access cover is for refrigerators.

Wear work gloves to protect your hands.

Freezer Door Gasket for GE PSH25MGWACV Refrigerator. Genuine product manufactured by GE. This freezer door gasket is for refrigerators.

It is on the inner door panel and creates a seal around the door to prevent warm air from entering the freezer compartment.

Safely store any food that could deteriorate while the door is open for this repair.

Ice Dispenser Chute Funnel Spring for GE PSH25MGWACV Refrigerator. Genuine product manufactured by GE. This dispenser ice chute funnel spring kit  is for refrigerators.

It provides tension to return the ice funnel back to its normal position after dispensing ice. The kit may include multiple parts; refer to your parts diagram for a complete list of parts included.

Unplug the refrigerator before installing this part. Wear work gloves to protect your hands.

Ice Maker Stripper for GE PSH25MGWACV Refrigerator. Genuine product manufactured by GE. This ice maker cube ejector is for refrigerators.

It rotates to push the ice cubes from the ice maker into the ice container.

Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.

Evaporator Fan Motor Dust Cap for GE PSH25MGWACV Refrigerator. Genuine product manufactured by GE. This evaporator fan motor dust cap is for refrigerators.

It prevents dust and debris from entering the fan motor bearing and housing.

Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.

Basket Bumper for GE PSH25MGWACV Refrigerator. Genuine product manufactured by GE. This basket bumper is for freezers.

It prevents the basket from hitting the back of the freezer when you push in the basket.

Follow the instructions in the owner's manual when installing this part.

Drain Tube for GE PSH25MGWACV Refrigerator. Genuine product manufactured by GE. This drain tube is for refrigerators.

It carries water formed during the defrost cycle to the drain pan at the bottom of the refrigerator.

Unplug the refrigerator before installing this part. Wear work gloves to protect your hands.

Armature Kit for GE PSH25MGWACV Refrigerator. Genuine product manufactured by GE. This ice dispenser solenoid stirrup is for refrigerators.

It attaches to the solenoid plunger to move the ice container deflector arm for dispensing crushed ice or cubed ice.

Safely store any food that could deteriorate while the power is off and unplug the refrigerator when installing this part. Wear work gloves to protect your hands.

Dispenser Door Recess Crank for GE PSH25MGWACV Refrigerator. Genuine product manufactured by GE.

This dispenser door recess crank is a genuine General Electric part, sold individually. This dispenser door recess crank can be used as a replacement part for a refrigerator. The dispenser door recess crank is situated inside the dispenser assembly, and it facilitates the passage of filtered water from the dispenser assembly into a glass or mug. Symptoms of a damaged dispenser door recess crank include excessive condensation or sweating on the refrigerator door exterior, an ice maker that will not dispense ice, a door that will not open or shut properly, or excessive frost buildup. If any of these symptoms are occurring, they could be attributable to a damaged dispenser door recess crank. This damage could manifest in the form of punctures, holes, tears, nicks, scrapes, or erosion to the material. If this is the case, the component should be removed and replaced with this genuine OEM replacement part. The replacement will require a putty knife and a Phillips head screwdriver.This is an OEM part sourced directly from the manufacturer. It is sold individually. This dispenser door recess crank is compatible with the following appliance brands: General Electric, RCA, and Hotpoint.