GE GFDS355GL1MG Dryer
Replacement Parts (OEM)

Power Cord (120v, Gas) for GE GFDS355GL1MG Dryer. Genuine product manufactured by GE.

Inlet Control Thermistor for GE GFDS355GL1MG Dryer. Genuine product manufactured by GE.

LP to Gas Conversion Kit for GE GFDS355GL1MG Dryer. Genuine product manufactured by GE. This liquid propane (LP) conversion kit is for dryers.

It converts a natural gas dryer to operate on liquid propane.

A qualified technician should install this LP conversion kit because of the risk of explosion or fire if the kit is installed incorrectly.

Dryer Bearing Kit (Top) for GE GFDS355GL1MG Dryer. Genuine product manufactured by GE.

Dryer Igniter for GE GFDS355GL1MG Dryer. Genuine product manufactured by GE. This burner igniter is for dryers.

It lights the gas burner to heat the dryer during the cycle.

Disconnect the power before installing this part. Wear work gloves to protect your hands.

Idler Arm for GE GFDS355GL1MG Dryer. Genuine product manufactured by GE. This idler pulley arm  is for dryers.
It holds the idler pulley.
Unplug the dryer before installing this part. Wear work gloves to protect your hands.

Diffuser for GE GFDS355GL1MG Dryer. Genuine product manufactured by GE. This diffuser is for dryers.

It covers the back of the dryer drum and houses the rear drum supports and/or rear bearing. Smooth side faces the interior of the dryer.

Unplug the dryer before installing this part. Wear work gloves to protect your hands.

Cap Nut for GE GFDS355GL1MG Dryer. Genuine product manufactured by GE. This cap nut is for dryers.

Follow appropriate safety practices when installing this cap nut.

Leveling Leg and Bracket Assembly (Rear) for GE GFDS355GL1MG Dryer. Genuine product manufactured by GE. This leveling leg and bracket is for dryers.

It attaches to the dryer base to support and level the dryer.

Wear work gloves to protect your hands when installing this part.

Blower Wheel w/insert for GE GFDS355GL1MG Dryer. Genuine product manufactured by GE. This dryer blower wheel is for laundry centers.

It attaches to the dryer drive motor shaft. It blows air through the drum and out the exhaust vent.

Unplug the laundry center before installing this part. Wear work gloves to protect your hands.