Replacement Parts for:
LG WM2688HNMA Washing Machine Replacement Parts (OEM)

See parts diagram(s) for LG WM2688HNMA Washing Machine. Use our parts diagrams to identify which parts need replacement and how to remove and replace parts.

Search

Detergent Box-Container Assembly for LG WM2688HNMA Washing Machine. Genuine product manufactured by LG.

Washer Balance Counterweight for LG WM2688HNMA Washing Machine. Genuine product manufactured by LG. Note: New weights can be used on all products. Old weights cannot be used on washers produced after August, 2007.

Washer Drain Hose for LG WM2688HNMA Washing Machine. Genuine product manufactured by LG.

Rotor Position Sensor Switch for LG WM2688HNMA Washing Machine. Genuine product manufactured by LG.

Washer Wire Harness, Motor, Multi for LG WM2688HNMA Washing Machine. Genuine product manufactured by LG.

Tub-to-Pump Hose Connector for LG WM2688HNMA Washing Machine. Genuine product manufactured by LG.

Tub to Pump Hose for LG WM2688HNMA Washing Machine. Genuine product manufactured by LG.

Washer Front Outer Tub Assembly for LG WM2688HNMA Washing Machine. Genuine product manufactured by LG.

Bearing Ball for LG WM2688HNMA Washing Machine. Genuine product manufactured by LG. Note: 4280FR4048N has been discontinued by the manufacturer. A substitution may be shipped in lieu of this product. The substitution may have a different design, but it will still be compatible with the same appliance models as the original part. It is not uncommon for manufacturers to discontinue parts and create substitutions. While the original part(s) and their substitution(s) may vary in appearance, they possess the same functionality. Please verify that your appliance model is compatible with this part before finalizing your order. GRP is not responsible for incorrect parts ordered.

Door Boot/Gasket (with drain port) for LG WM2688HNMA Washing Machine. Genuine Product, Haier manufactured the original product for your LG WM2688HNMA. A drain hole has been added to the gasket (boot) of somelots produced since September, 2007. Gaskets (boots) with the drain hole do not appear in washers produced in August, 2007 or earlier.Install a gasket without drain hole on washers that were produced in August, 2007 or earlier. For washers produced since September, 2007, it is necessary to check and see if they were manufactured with a new gasket (with drain hole) or old gasket (without the drain hole).

Notes:

1. Part numbers have been changed only on new gaskets.

2. To Replace Gasket: Check manufacture date and, on newer models, inspect the existing gasket.

Contact us if you have any questions prior to placing your order.