Kenmore 363.61542411 Washer/Dryer
Replacement Parts (OEM)

Wire Harness for Kenmore 363.61542411 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 363.61542411.

Terminal Block Stack for Kenmore 363.61542411 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 363.61542411. This terminal block is for dryers.

It connects the house electrical power to the dryer wiring harness.

Unplug the dryer before installing this part. Wear work gloves to protect your hands.

Washer Tub-To-Pump Hose for Kenmore 363.61542411 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 363.61542411. This washer tub-to-pump hose is for laundry centers.

It carries water from the washer tub to the drain pump.

Unplug the laundry center and shut off the water supply before installing this part. Wear work gloves to protect your hands.

Lactuator Lid for Kenmore 363.61542411 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 363.61542411. This washer lid switch actuator is for laundry centers.

It presses the lid switch when you close the lid to start the washer.

Unplug the laundry center before installing this part. Wear work gloves to protect your hands.

Blower Wheel w/insert for Kenmore 363.61542411 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 363.61542411. This dryer blower wheel is for laundry centers.

It attaches to the dryer drive motor shaft. It blows air through the drum and out the exhaust vent.

Unplug the laundry center before installing this part. Wear work gloves to protect your hands.

Drive Belt 3L for Kenmore 363.61542411 Washer/Dryer. Genuine product manufactured by Kenmore. This drive belt is for washers.

It connects the drive motor to the drive system in the washer to spin the basket.

Unplug the washer before installing this part. Wear work gloves to protect your hands.

Agitator Screw and O-Ring for Kenmore 363.61542411 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 363.61542411. This agitator screw and O-ring is for washers.

It attaches the agitator auger to the agitator base.

Unplug the washer before installing this part. Wear work gloves to protect your hands.

Dryer Idler Arm for Kenmore 363.61542411 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 363.61542411. This dryer idler arm is for laundry centers.

It maintains proper tension on the dryer drive belt to spin the drum.

Unplug the laundry center before installing this part. Wear work gloves to protect your hands.

Door Boot Gasket for Kenmore 363.61542411 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 363.61542411.

Fork Support Assembly for Kenmore 363.61542411 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 363.61542411.