GE DCCB330GD2KC Flame Sensor/Detector - Genuine OEM

Lint Filter for GE DCCB330GD2KC Dryer (OEM), manufactured by GE

Lint Trap Duct Assembly for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE. .  Does NOT include moisture sensor bars, includes felt drum seal, blower seal, wires, wire connector, and wire tie.

Timer and Bracket for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

Drum Drive Be for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

2-Coil Gas Shut-Off Valve Assembly for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

Rear Drum Bearing Kit for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

Dryer Drum Top Front Support Bearing for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

 

Note: Dryer upper drum bearing without slides.

Drum Assembly for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

Blower Housing for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

Gas-Burner Igniter Assembly for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

High Limit Thermostat (Safety) for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

Dual Coil Kit for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

Main Coil for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

Dryer Door Hinge for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

Door Striker Clip for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

Blower Wheel for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

Lint Filter-Screen-Mesh for GE DCCB330GD2KC Dryer.

Front Drum Bearing Slide (White) for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

 

Note: The dryer's drum slides help to support the front of the drum as it rotates. If the drum slides are worn out, the dryer will be noisy. It is recommended replacing all of the slides together.

Leveling Leg-Screw (gray) for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

Door Handle - Off-White for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

Felt for Trap Duct for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE. Note: Part# WE09X20441 has been discontinued by the manufacturer. A substitution may be shipped in lieu of this product. The substitution may have a different design, but it will still be compatible with the same appliance models as the original part. It is not uncommon for manufacturers to discontinue parts and create substitutions. While the original part(s) and their substitution(s) may vary in appearance, they possess the same functionality. Please verify that your appliance model is compatible with this part before finalizing your order. GRP is not responsible for incorrect parts ordered.

Door Latch for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

Door Switch for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

Interlock Door Switch for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

Button Switch for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

Lint Screen Housing Seal (36 in) for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

Rear Drum Bearing Sleeve for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

Retainer O-Ring for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

Idler Pulley (Yellow) for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

Drive Motor Assembly for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE. Replaces old "T" & "V" style motors. 

Dryer Igniter for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE. This burner igniter is for dryers.

It lights the gas burner to heat the dryer during the cycle.

Disconnect the power before installing this part. Wear work gloves to protect your hands.

Idler Arm for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE. This idler pulley arm  is for dryers.
It holds the idler pulley.
Unplug the dryer before installing this part. Wear work gloves to protect your hands.

Diffuser for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE. This diffuser is for dryers.

It covers the back of the dryer drum and houses the rear drum supports and/or rear bearing. Smooth side faces the interior of the dryer.

Unplug the dryer before installing this part. Wear work gloves to protect your hands.

Felt Trap Duct Seal for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE. This drum felt seal is for dryers.

It allows the drum to glide smoothly on the front panel.

Unplug the dryer before installing this part. Wear work gloves to protect your hands.

Cap Nut for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE. This cap nut is for dryers.

Follow appropriate safety practices when installing this cap nut.

Leveling Leg and Bracket Assembly (Rear) for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE. This leveling leg and bracket is for dryers.

It attaches to the dryer base to support and level the dryer.

Wear work gloves to protect your hands when installing this part.

Main Orifice for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

Rear Level Leg Bracket for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

Phillips Screw for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.

Drum Baffle for GE DCCB330GD2KC Dryer. Genuine product manufactured by GE.