GE DCSR483EA1WW Dryer Timer - Genuine OEM

Lint Trap Duct Assembly for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE. .  Does NOT include moisture sensor bars, includes felt drum seal, blower seal, wires, wire connector, and wire tie.

Heater and Housing Assembly for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Drum Drive Be for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Rear Drum Bearing Kit for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Dryer Drum Top Front Support Bearing for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

 

Note: Dryer upper drum bearing without slides.

Wrinkle Care -On/Off Rocker Switch for GE DCSR483EA1WW Dryer.

Felt for Trap Duct for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE. Note: Part# WE09X20441 has been discontinued by the manufacturer. A substitution may be shipped in lieu of this product. The substitution may have a different design, but it will still be compatible with the same appliance models as the original part. It is not uncommon for manufacturers to discontinue parts and create substitutions. While the original part(s) and their substitution(s) may vary in appearance, they possess the same functionality. Please verify that your appliance model is compatible with this part before finalizing your order. GRP is not responsible for incorrect parts ordered.

Lamp/Light Bulb -10W for GE DCSR483EA1WW Dryer.

Door Handle - White for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Drum Assembly for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Timer Resistor -4500 Ohm for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Blower Housing for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Drum Bearing Slide/Glide/Pad for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

 

Note: There are two of these needed on your dryer. These go on the inner most slots on the front bearing. Sold individually will need to purchase two. The drum slides support the front of the dryer drum instead of rollers or bearings. As they wear out the dryer will make more noise.

Rotary Start Switch for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Thermostat High-Limit for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Cycling Thermostat/Drum Outlet for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Dryer Door Seal/Gasket for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Dryer Door Hinge for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Outer Dryer Door - White for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Door Striker Clip for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Blower Wheel for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Rotary Temperature Switch for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Lint Filter-Screen-Mesh for GE DCSR483EA1WW Dryer.

Front Drum Bearing Slide (White) for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

 

Note: The dryer's drum slides help to support the front of the drum as it rotates. If the drum slides are worn out, the dryer will be noisy. It is recommended replacing all of the slides together.

Leveling Leg-Screw (gray) for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Top Panel -white for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Interlock Door Switch for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Door Latch for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Door Switch for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

4-Wire Cycling Thermostat for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

D-Shaped Knob Insert Clip for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

High-Limit Safety Thermostat for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE. High limit thermostat, L210.

Control Knob for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Front Panel and Door Assembly for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Lint Screen Housing Seal (36 in) for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Rear Drum Bearing Sleeve for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Retainer O-Ring for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Timer Control Knob (White) for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Idler Pulley (Yellow) for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Drive Motor Assembly for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE. Replaces old "T" & "V" style motors. 

Dryer Shoe Rack for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE. This drying rack is for dryers.

It attaches inside the drum and remains stationary as the dryer turns so you can dry shoes, sweaters and other items that shouldn't be tumbled.

Follow the instructions in the owner's manual for installing this part.

Idler Arm for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE. This idler pulley arm  is for dryers.
It holds the idler pulley.
Unplug the dryer before installing this part. Wear work gloves to protect your hands.

Diffuser for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE. This diffuser is for dryers.

It covers the back of the dryer drum and houses the rear drum supports and/or rear bearing. Smooth side faces the interior of the dryer.

Unplug the dryer before installing this part. Wear work gloves to protect your hands.

Felt Trap Duct Seal for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE. This drum felt seal is for dryers.

It allows the drum to glide smoothly on the front panel.

Unplug the dryer before installing this part. Wear work gloves to protect your hands.

Cap Nut for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE. This cap nut is for dryers.

Follow appropriate safety practices when installing this cap nut.

Leveling Leg and Bracket Assembly (Rear) for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE. This leveling leg and bracket is for dryers.

It attaches to the dryer base to support and level the dryer.

Wear work gloves to protect your hands when installing this part.

Terminal Block and Grounding Strap for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE. This terminal block and grounding strap is for dryers.

It connects the house electrical power to the dryer wiring harness.

Unplug the dryer before installing this part. Wear work gloves to protect your hands.

Phillips Screw for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.

Drum Baffle for GE DCSR483EA1WW Dryer. Genuine product manufactured by GE.