Parts Diagram for GE DBXR453EV2WW Dryer: 01-BACKSPLASH,BLOWER&DRIVEASSEMBLY

Timer Resistor -4500 Ohm for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

OEM Motor Support, manufactured by GE

Cycling Thermostat/Drum Outlet for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

OEM Screw (1016X1/2), manufactured by GE

Phillips Screw for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

Lint Trap Duct Assembly for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE. .  Does NOT include moisture sensor bars, includes felt drum seal, blower seal, wires, wire connector, and wire tie.

Heater and Housing Assembly for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

Drum Drive Be for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

Rear Drum Bearing Kit for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

Dryer Drum Top Front Support Bearing for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

 

Note: Dryer upper drum bearing without slides.

Felt for Trap Duct for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE. Note:  WE09X20441 has been discontinued by the manufacturer. A substitution may be shipped in lieu of this product. The substitution may have a different design, but it will still be compatible with the same appliance models as the original part. It is not uncommon for manufacturers to discontinue parts and create substitutions. While the original part(s) and their substitution(s) may vary in appearance, they possess the same functionality. Please verify that your appliance model is compatible with this part before finalizing your order. GRP is not responsible for incorrect parts ordered.

Door Switch for GE DBXR453EV2WW Dryer.

Door Handle - White for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

Gas Diffuser for GE DBXR453EV2WW Dryer.

Blower Housing for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

Drum Bearing Slide/Glide/Pad for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

 

Note: There are two of these needed on your dryer. These go on the inner most slots on the front bearing. Sold individually will need to purchase two. The drum slides support the front of the dryer drum instead of rollers or bearings. As they wear out the dryer will make more noise.

Rotary Start Switch for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

Thermostat High-Limit for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

Dryer Door Seal/Gasket for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

Dryer Door Hinge for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

Dryer Drum Assembly for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

Outer Dryer Door - White for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

Door Striker Clip for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

Blower Wheel for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

Dryer Timer for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

Lint Filter-Screen-Mesh for GE DBXR453EV2WW Dryer.

Front Drum Bearing Slide (White) for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

 

Note: The dryer's drum slides help to support the front of the drum as it rotates. If the drum slides are worn out, the dryer will be noisy. It is recommended replacing all of the slides together.

Leveling Leg-Screw (gray) for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

Top Panel -white for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

D-Shaped Knob Insert Clip for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

High-Limit Safety Thermostat for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE. High limit thermostat, L210.

Control Knob for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

Front Panel and Door Assembly for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

Lint Screen Housing Seal (36 in) for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

Timer Control Knob (White) for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

Idler Pulley (Yellow) for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

Drive Motor Assembly for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE. Replaces old "T" & "V" style motors. 

Rear Body Panel (White) for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE.

Felt Trap Duct Seal for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE. This drum felt seal is for dryers.

It allows the drum to glide smoothly on the front panel.

Unplug the dryer before installing this part. Wear work gloves to protect your hands.

Cap Nut for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE. This cap nut is for dryers.

Follow appropriate safety practices when installing this cap nut.

Terminal Block and Grounding Strap for GE DBXR453EV2WW Dryer. Genuine product manufactured by GE. This terminal block and grounding strap is for dryers.

It connects the house electrical power to the dryer wiring harness.

Unplug the dryer before installing this part. Wear work gloves to protect your hands.

GE OEM Dryer End Cap (Left Side White), manufactured by GE

GE OEM End Cap (Rh Snow Wh), manufactured by GE

D-Shaped Knob Insert Clip, was replaced by GE. The new Part, #WE1X980 (also manufactured by GE) will be shipped upon ordering this product.

GE OEM Motor Support, manufactured by GE

GE OEM Exhaust Duct Assembly, manufactured by GE

GE OEM Screw (1016X1/2), manufactured by GE

GE OEM Motor Plate, manufactured by GE

GE OEM SIde Panel (White), manufactured by GE

The GE Terminal Block Cover is needed when repairing your GE appliance and is a genuine OEM (Original Equipment Manufacturer) part from GE. Eventually parts can wear out on your GE appliance, when that happens trust Genuine Replacement Parts to have the GE replacement part you need to fix your appliance. We are one of the top online options for GE replacement parts and repair. If you have the model number or part number of your appliance that is different than what is being shown, please enter it at the top search bar for best results. This GE requires part when fixing your appliance. Follow the instructions in the owner's manual to install the part.

The GE Insulator is needed when repairing your GE appliance and is a genuine OEM (Original Equipment Manufacturer) part from GE. Eventually parts can wear out on your GE appliance, when that happens trust Genuine Replacement Parts to have the GE replacement part you need to fix your appliance. We are one of the top online options for GE replacement parts and repair. If you have the model number or part number of your appliance that is different than what is being shown, please enter it at the top search bar for best results. This GE requires part when fixing your appliance. Follow the instructions in the owner's manual to install the part.