Parts Diagram for GE DDC4500SBM Dryer: Upper Cabinet Parts

OEM Screw (#8), manufactured by GE

OEM Screw, manufactured by GE

Phillips Screw for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

OEM Screw (1016X1/2), manufactured by GE

2-Coil Gas Shut-Off Valve Assembly for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

Rear Drum Bearing Kit for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

Flame Sensor/Detector for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

Drum Bearing Slide/Glide/Pad for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

 

Note: There are two of these needed on your dryer. These go on the inner most slots on the front bearing. Sold individually will need to purchase two. The drum slides support the front of the dryer drum instead of rollers or bearings. As they wear out the dryer will make more noise.

Gas-Burner Igniter Assembly for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

Thermostat High-Limit for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

Cycling Thermostat for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

High Limit Thermostat (Safety) for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

Dual Coil Kit for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

Main Coil for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

Dryer Drive Belt -87inch for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

Dryer Door Hinge for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

Lint-Duct Felt Seal for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

Door Striker Clip for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

Blower Wheel for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

Front Drum Bearing Slide (White) for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

 

Note: The dryer's drum slides help to support the front of the drum as it rotates. If the drum slides are worn out, the dryer will be noisy. It is recommended replacing all of the slides together.

Leveling Leg-Screw (gray) for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

Door Latch for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

Door Switch for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

Lint Screen Housing Seal (36 in) for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

Interlock Door Switch for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

Door Gasket Seal for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

Button Switch Assembly for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

Idler Pulley (Yellow) for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

Drive Motor Assembly for GE DDC4500SBM Dryer. Genuine product manufactured by GE. Replaces old "T" & "V" style motors. 

Baffle Kit for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

Dryer Igniter for GE DDC4500SBM Dryer. Genuine product manufactured by GE. This burner igniter is for dryers.

It lights the gas burner to heat the dryer during the cycle.

Disconnect the power before installing this part. Wear work gloves to protect your hands.

Idler Arm for GE DDC4500SBM Dryer. Genuine product manufactured by GE. This idler pulley arm  is for dryers.
It holds the idler pulley.
Unplug the dryer before installing this part. Wear work gloves to protect your hands.

Cap Nut for GE DDC4500SBM Dryer. Genuine product manufactured by GE. This cap nut is for dryers.

Follow appropriate safety practices when installing this cap nut.

Main Orifice for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

Dryer Door Handle - White for GE DDC4500SBM Dryer. Genuine product manufactured by GE.

GE OEM Lamp Assembly (Amber), manufactured by GE

GE OEM Screw, manufactured by GE

GE OEM Screw (PKG 12), manufactured by GE

GE OEM Screw, manufactured by GE

GE OEM Push Button, manufactured by GE

GE OEM Screw, manufactured by GE

GE  OEM Switch Trim, manufactured by GE

GE OEM Meter Case (Right Ad), manufactured by GE

GE OEM Ground Clip, manufactured by GE

GE OEM Door Handle (Almond), manufactured by GE

GE OEM Drum Bearing, manufactured by GE

GE OEM Screw, manufactured by GE

GE OEM Screw (#8), manufactured by GE

GE OEM Speed Nut, manufactured by GE

GE OEM Screw (#8), manufactured by GE

GE  OEM Knockout Dryer Cabinet, manufactured by GE

GE  OEM Power Cord Assembly, manufactured by GE

GE OEM Screw (1016X1/2), manufactured by GE

GE OEM Support (Rear), manufactured by GE

GE OEM Pipe Clamp, manufactured by GE

GE OEM Drum Assembly (5.4 - Elect), manufactured by GE

GE  OEM Heat Deflector, manufactured by GE

GE  OEM Ground Strap Assembly, manufactured by GE

GE OEM Thermostat Bracket, manufactured by GE

GE OEM Screw (No. 10), manufactured by GE

The GE Retainer Bearing is needed when repairing your GE appliance and is a genuine OEM (Original Equipment Manufacturer) part from GE. Eventually parts can wear out on your GE appliance, when that happens trust Genuine Replacement Parts to have the GE replacement part you need to fix your appliance. We are one of the top online options for GE replacement parts and repair. If you have the model number or part number of your appliance that is different than what is being shown, please enter it at the top search bar for best results. This GE requires part when fixing your appliance. Follow the instructions in the owner's manual to install the part.

GE OEM Screw, manufactured by GE

The GE Clamp is needed when repairing your GE appliance and is a genuine OEM (Original Equipment Manufacturer) part from GE. Eventually parts can wear out on your GE appliance, when that happens trust Genuine Replacement Parts to have the GE replacement part you need to fix your appliance. We are one of the top online options for GE replacement parts and repair. If you have the model number or part number of your appliance that is different than what is being shown, please enter it at the top search bar for best results. This GE requires part when fixing your appliance. Follow the instructions in the owner's manual to install the part.

GE OEM Motor Strap, manufactured by GE

The GE Motor Strap is needed when repairing your GE appliance and is a genuine OEM (Original Equipment Manufacturer) part from GE. Eventually parts can wear out on your GE appliance, when that happens trust Genuine Replacement Parts to have the GE replacement part you need to fix your appliance. We are one of the top online options for GE replacement parts and repair. If you have the model number or part number of your appliance that is different than what is being shown, please enter it at the top search bar for best results. This GE requires part when fixing your appliance. Follow the instructions in the owner's manual to install the part.

GE OEM Motor Support, manufactured by GE

GE OEM Exhaust Duct Assembly, manufactured by GE

GE OEM Screw, manufactured by GE

GE  OEM Motor Bracket, manufactured by GE

GE OEM Motor Bracket Screw, manufactured by GE

GE Ground Screw, manufactured By GE

GE OEM Gas Valve Nut, manufactured by GE

GE OEM Shut Off Nipple, manufactured by GE

GE OEM Leak Limiter, manufactured by GE

GE OEM Pipe Lug Assembly, manufactured by GE

The GE Burner Assembly is needed when repairing your GE appliance and is a genuine OEM (Original Equipment Manufacturer) part from GE. Eventually parts can wear out on your GE appliance, when that happens trust Genuine Replacement Parts to have the GE replacement part you need to fix your appliance. We are one of the top online options for GE replacement parts and repair. If you have the model number or part number of your appliance that is different than what is being shown, please enter it at the top search bar for best results. This GE requires part when fixing your appliance. Follow the instructions in the owner's manual to install the part.

GE  OEM Screw (832 CA HXW 1/2), manufactured by GE

GE OEM Shut Off Valve, manufactured by GE